ผลต่างระหว่างรุ่นของ "คู่มือการพัฒนา EAI Mail Server บน CentOS 8/en"

จาก Wiki_EAI
ไปยังการนำทาง ไปยังการค้นหา
(สร้างหน้าด้วย "'''Signature ok '''subject=/C=JP/ST=Hiroshima/L=Hiroshima/O=GTS/OU=Server World/CN=www.srv.world/emailAddress=xxx@eai.in.th '''Getting Private key'''")
(สร้างหน้าด้วย "3. Modify /etc/aliases by adding the lines '''# vi /etc/aliases'''")
 
(ไม่แสดง 5 รุ่นระหว่างกลางโดยผู้ใช้คนเดียวกัน)
แถว 72: แถว 72:
 
  '''Active: <span style='color:red'>active (running)</span> since Mon 2019-11-18 14:12:03 +07; 1h 13min ago'''
 
  '''Active: <span style='color:red'>active (running)</span> since Mon 2019-11-18 14:12:03 +07; 1h 13min ago'''
  
2. Check the ''firewall zone'' and ''network interface'' ที่เปิดอยู่
+
2. Check the ''firewall zone'' and ''network interface'' that are opened
 
  '''# firewall-cmd --get-active-zones'''
 
  '''# firewall-cmd --get-active-zones'''
 
''example''
 
''example''
แถว 78: แถว 78:
 
  '''interfaces: ens32
 
  '''interfaces: ens32
  
3. Check services list of firewall that open at public zone  
+
3. Check services of firewall in public zone  
 
  '''# firewall-cmd --zone=public --list-services'''
 
  '''# firewall-cmd --zone=public --list-services'''
  
แถว 399: แถว 399:
 
  '''# postconf -vM dovecot/unix="dovecot  unix  -      n      n      -      -      pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${recipient}"
 
  '''# postconf -vM dovecot/unix="dovecot  unix  -      n      n      -      -      pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${recipient}"
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Sample file
* ตัวอย่างไฟล์
 
 
  smtps inet n - - - - smtpd
 
  smtps inet n - - - - smtpd
 
     -o syslog_name=postfix/smtps
 
     -o syslog_name=postfix/smtps
แถว 410: แถว 409:
 
  dovecot  unix  -      n      n      -      -      pipe
 
  dovecot  unix  -      n      n      -      -      pipe
 
     flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${recipient}'''
 
     flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${recipient}'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
 
 
*  restart postfix  
 
*  restart postfix  
 
  '''# systemctl restart postfix'''
 
  '''# systemctl restart postfix'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
== 7. Setup Dovecot ==
== 7. ตั้งค่า dovecot ==
+
=== Create a connect file between Dovecot and Mariadb ===
=== สร้างไฟล์เชื่อมต่อระหว่าง dovecot และ mariadb ===
+
* Create a script to let Dovecot to be able to use with SQL  
* สร้าง script เพื่อให้ dovecot ใช้งานกับ SQL ที่เราได้กำหนดก่อนหน้านี้
 
 
  '''# vi /etc/dovecot/dovecot-sql.conf.ext'''
 
  '''# vi /etc/dovecot/dovecot-sql.conf.ext'''
</div>
 
  
  <div lang="th" dir="ltr" class="mw-content-ltr">
+
  '''driver = mysql'''
'''driver = mysql'''
 
 
  '''connect = host=127.0.0.1 dbname=''[[eaimail]]'' user=''[[yourdbuser]]'' password=''[[yourdbpassword]]'''''
 
  '''connect = host=127.0.0.1 dbname=''[[eaimail]]'' user=''[[yourdbuser]]'' password=''[[yourdbpassword]]'''''
 
  '''default_pass_scheme = CRYPT'''
 
  '''default_pass_scheme = CRYPT'''
 
  '''password_query = SELECT email as user, password FROM users WHERE email='%u';'''
 
  '''password_query = SELECT email as user, password FROM users WHERE email='%u';'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Allow users in the Dovecot group to use
* กำหนดสิทธิ์อนุญาตให้ user ที่อยู่ใน dovecot group ใช้งาน
 
 
  '''# chmod 640 /etc/dovecot/dovecot-sql.conf.ext && chgrp dovecot /etc/dovecot/dovecot-sql.conf.ext
 
  '''# chmod 640 /etc/dovecot/dovecot-sql.conf.ext && chgrp dovecot /etc/dovecot/dovecot-sql.conf.ext
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
=== Modify "/etc/dovecot/dovecot.conf" ===
=== แก้ไขไฟล์ "/etc/dovecot/dovecot.conf" ===
+
* Backup the exisitng configuration
* Backup ค่า config เดิมไว่ก่อน
 
 
  '''# mv /etc/dovecot/dovecot.conf /etc/dovecot/dovecot.conf-backup'''
 
  '''# mv /etc/dovecot/dovecot.conf /etc/dovecot/dovecot.conf-backup'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Config dovecot
* ตั้งค่า config dovecot โดยสร้างไฟล์ให้ และใส่คำสั่งตามด้านล่าง
 
 
  '''# vi /etc/dovecot/dovecot.conf'''
 
  '''# vi /etc/dovecot/dovecot.conf'''
''ตัวอย่าง''
+
''example''
</div>
 
  
  <div lang="th" dir="ltr" class="mw-content-ltr">
+
  '''protocols = imap pop3 lmtp
'''protocols = imap pop3 lmtp
 
 
  '''log_timestamp = "%Y-%m-%d %H:%M:%S "
 
  '''log_timestamp = "%Y-%m-%d %H:%M:%S "
 
  '''mail_location = maildir:/home/vmail/%d/%n/Maildir
 
  '''mail_location = maildir:/home/vmail/%d/%n/Maildir
แถว 496: แถว 481:
 
  '''    args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes
 
  '''    args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes
 
  '''}'''
 
  '''}'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Restart Dovecot
* สั่ง restart dovecot
 
 
  '''# systemctl restart dovecot'''
 
  '''# systemctl restart dovecot'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
== 8. Test the EAI Email Server ==
== 8. ทดสอบการทำงานของ EAI Email Server ==
+
1. Test imap
1. ทดสอบ imap
 
 
  '''# telnet localhost imap'''
 
  '''# telnet localhost imap'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
2. Should get the result, the use ''quit'' to quit from telnet
2. ได้ผลตามด้านล่าง และ ใช้คำสั่ง quit เพื่ออแกจาก telnet
 
 
  '''Trying 127.0.0.1...'''
 
  '''Trying 127.0.0.1...'''
 
  '''Connected to localhost.localdomain.'''
 
  '''Connected to localhost.localdomain.'''
 
  '''Escape character is '^]'.'''
 
  '''Escape character is '^]'.'''
 
  '''+OK Dovecot ready.'''
 
  '''+OK Dovecot ready.'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
3. Modify /etc/aliases by adding the lines
3. แก้ใขไฟล์ /etc/aliases โดยเพิ่มบรรทัดตามด้านล่าง
 
 
  '''# vi /etc/aliases'''
 
  '''# vi /etc/aliases'''
</div>
 
  
  <div lang="th" dir="ltr" class="mw-content-ltr">
+
  '''mailer-daemon: postmaster'''
'''mailer-daemon: postmaster'''
 
 
  '''postmaster: root'''
 
  '''postmaster: root'''
 
  '''''[[root: postmaster@eai.in.th]]'''''
 
  '''''[[root: postmaster@eai.in.th]]'''''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
4 Update aliases and restart postfix
4 สั่ง update aliases และ restart postfix
 
 
  '''# newaliases'''
 
  '''# newaliases'''
 
  '''# systemctl restart postfix'''
 
  '''# systemctl restart postfix'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
5. Test SMTP server
5. ทดสอบ smtp server
 
 
  '''# telnet localhost 25'''
 
  '''# telnet localhost 25'''
 
  '''# ehlo localhost'''
 
  '''# ehlo localhost'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
6. Should get the following results
6. จะได้ผลลัพธ์ตามด้านล่าง
 
 
  '''250-mail.eai.in.th'''
 
  '''250-mail.eai.in.th'''
 
  '''250-PIPELINING'''
 
  '''250-PIPELINING'''
แถว 552: แถว 521:
 
  '''250-DSN'''
 
  '''250-DSN'''
 
  '''250 SMTPUTF8'''
 
  '''250 SMTPUTF8'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
7. Install ''mailx'' and test sending emails
7. ติดตั้ง mailx และทดสอบส่ง email
 
 
  '''# yum install mailx'''
 
  '''# yum install mailx'''
 
  '''# mailx thai@eai.in.th ''(ใส่ subject แล้ว enter ตามด้วยเนื้อหา และใช้ Ctrl+D เพื่อส่งออก)'''''
 
  '''# mailx thai@eai.in.th ''(ใส่ subject แล้ว enter ตามด้วยเนื้อหา และใช้ Ctrl+D เพื่อส่งออก)'''''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
8. Check the log of email sending : /var/log/maillog as following:
8. ตรวจสอบ log ของการส่ง Email : /var/log/maillog ซึ้งจะได้ผลตามด้านล่าง
 
 
  '''Nov 13 15:19:07 mail postfix/pickup[31954]: E9AB020199E5: uid=0 from=<root>'''
 
  '''Nov 13 15:19:07 mail postfix/pickup[31954]: E9AB020199E5: uid=0 from=<root>'''
 
  '''Nov 13 15:19:07 mail postfix/cleanup[1938]: E9AB020199E5: message-id=<20171113081907.E9AB020199E5@mail.eai.in.th>'''
 
  '''Nov 13 15:19:07 mail postfix/cleanup[1938]: E9AB020199E5: message-id=<20171113081907.E9AB020199E5@mail.eai.in.th>'''
แถว 567: แถว 532:
 
  '''Nov 13 15:19:08 mail postfix/pipe[1946]: E9AB020199E5: to=<tanagan@eai.in.th>, relay=dovecot, delay=0.09, delays=0.04/0.01/0/0.03, dsn=2.0.0, status=sent (delivered via dovecot service)'''
 
  '''Nov 13 15:19:08 mail postfix/pipe[1946]: E9AB020199E5: to=<tanagan@eai.in.th>, relay=dovecot, delay=0.09, delays=0.04/0.01/0/0.03, dsn=2.0.0, status=sent (delivered via dovecot service)'''
 
  '''Nov 13 15:19:08 mail postfix/qmgr[21141]: E9AB020199E5: removed'''
 
  '''Nov 13 15:19:08 mail postfix/qmgr[21141]: E9AB020199E5: removed'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
9. Check log of dovecot sedning : /home/vmail/dovecot-deliver.log should get the following results
9. ตรวจสอบ log ผลการส่งของ dovecot : /home/vmail/dovecot-deliver.log ซึ่งจะได้ผลตามด้านล่าง
 
 
  '''2017-11-13 15:19:08 lda(tanagan@eai.in.th): Info: msgid=<20171113081907.E9AB020199E5@mail.eai.in.th>: saved mail to INBOX'''
 
  '''2017-11-13 15:19:08 lda(tanagan@eai.in.th): Info: msgid=<20171113081907.E9AB020199E5@mail.eai.in.th>: saved mail to INBOX'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
10. Check the mailbox. When there are sendings and receivings emails, you will see the results
10. ตรวจสอบ mailbox เมื่อมีการรับส่ง-ส่ง Email จะสร้างขึ้นโดย dovecot ซึ่งจะได้ผลตามภาพ
 
 
  '''# cd /home/vmail/eai.in.th/thai/Maildir'''
 
  '''# cd /home/vmail/eai.in.th/thai/Maildir'''
 
  '''# find'''
 
  '''# find'''
</div>
 
  
  <div lang="th" dir="ltr" class="mw-content-ltr">
+
  '''.'''
'''.'''
 
 
  '''./dovecot-uidlist'''
 
  '''./dovecot-uidlist'''
 
  '''./cur'''
 
  '''./cur'''
แถว 589: แถว 548:
 
  '''./dovecot.index.log'''
 
  '''./dovecot.index.log'''
 
  '''./tmp'''
 
  '''./tmp'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
11. Check mailbox by using mail client, mutt, to see emaila inside the mailbox  
11. ตรวจสอบ mailbox โดยใช้ mail client คือ mutt เพื่อดู email ภายใน mailbox  
 
 
  '''# yum install mutt'''
 
  '''# yum install mutt'''
 
  '''# mutt -f .'''
 
  '''# mutt -f .'''
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
12. Test sending an EAI mails
12. ทดสอบการส่งเมลในรูปแบบ eai
 
 
  '''# telnet localhost 25'''
 
  '''# telnet localhost 25'''
 
  '''# EHLO localhost'''
 
  '''# EHLO localhost'''
แถว 607: แถว 562:
 
  '''# เทสอีเมลส์ภาษาไทย'''
 
  '''# เทสอีเมลส์ภาษาไทย'''
 
  '''# .'''
 
  '''# .'''
*ใช้เครื่องหมาย “.” เพื่อจบข้อความและส่งข้อความ
+
*Use “.” to end and sending the message
*กด Ctrl+] เพื่อออก
+
*Press Ctrl+] to quit
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
== 9. Installing Roundcube Webmail ==
== 9. ติดตั้ง roundcube webmail ==
 
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
=== Installing Apache PHP ===
=== ติดตั้ง apache php ===
 
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Install repo of php 7.4 and all to install php 7.4  
* ติดตั้ง repo ของ php 7.4 เพิ่มเติม และเปิดให้สามารถติดตั้ง php 7.4 ได้
 
 
  '''# yum -y install https://rpms.remirepo.net/enterprise/remi-release-8.rpm  
 
  '''# yum -y install https://rpms.remirepo.net/enterprise/remi-release-8.rpm  
 
  '''# yum module reset php && yum module enable php:remi-7.4 -y
 
  '''# yum module reset php && yum module enable php:remi-7.4 -y
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Install php, php library and apache web server
* ใช้คำสั่งติดตั้ง php, php library และ apache web server
 
 
  '''# yum -y install httpd php php-common php-devel php-imap php-imagick php-json php-xml php-mbstring php-pear php-pdo php-intl php-ldap php-gd php-zip php-pdo_mysql php-curl php-bz2 php-gmp
 
  '''# yum -y install httpd php php-common php-devel php-imap php-imagick php-json php-xml php-mbstring php-pear php-pdo php-intl php-ldap php-gd php-zip php-pdo_mysql php-curl php-bz2 php-gmp
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Start service apache and php and set to start automatiacally
* ใช้คำสั่ง start service apache และ php และให้เริ่มทำงานโดยอัติโนมัติทุกครั้งที่เปิดเครื่อง
 
 
  '''# systemctl start httpd && systemctl start php-fpm
 
  '''# systemctl start httpd && systemctl start php-fpm
 
  '''# ​systemctl enable httpd && systemctl enable php-fpm
 
  '''# ​systemctl enable httpd && systemctl enable php-fpm
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Check apache status
* ตรวจสอบสถานะการทำงานของ apache และ
 
 
  '''# systemctl status httpd  
 
  '''# systemctl status httpd  
 
  '''# systemctl status php-fpm
 
  '''# systemctl status php-fpm
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
=== Setup php ===
=== ตั้งค่า php ===
+
* Setup timezone
* ตั้งค่า timezone (เราจะตั้งค่าเฉพาะส่วนที่จำเป็นต่อการใช้งาน roundcube)
+
  '''# vi /etc/php.ini  
  '''# vi /etc/php.ini
 
</div>
 
  
  <div lang="th" dir="ltr" class="mw-content-ltr">
+
  [Date]
[Date]
 
 
  ; Defines the default timezone used by the date functions
 
  ; Defines the default timezone used by the date functions
 
  ; http://php.net/date.timezone  
 
  ; http://php.net/date.timezone  
 
  date.timezone = Asia/Bangkok
 
  date.timezone = Asia/Bangkok
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
=== Setup MariaBD database ===
=== ตั้งค่า mariadb database ===
+
* Create database roundcubemail with username=rcmail, password=passrc
* สร้าง database roundcubemail โดยกำหนด username=rcmail, password=passrc
 
 
  '''# mysql -u root -p
 
  '''# mysql -u root -p
</div>
 
  
  <div lang="th" dir="ltr" class="mw-content-ltr">
+
  '''# CREATE DATABASE roundcubemail CHARACTER SET utf8 COLLATE utf8_general_ci;
'''# CREATE DATABASE roundcubemail CHARACTER SET utf8 COLLATE utf8_general_ci;
 
 
  '''# GRANT ALL PRIVILEGES ON roundcubemail.* TO rcmail@localhost IDENTIFIED BY 'passrc';
 
  '''# GRANT ALL PRIVILEGES ON roundcubemail.* TO rcmail@localhost IDENTIFIED BY 'passrc';
 
  '''# FLUSH PRIVILEGES;
 
  '''# FLUSH PRIVILEGES;
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
=== Setup RoundCube ===
=== ตั้งค่า roundcube ===
 
 
  '''# cd /var/www/html/
 
  '''# cd /var/www/html/
 
  '''# wget https://github.com/roundcube/roundcubemail/releases/download/1.4.4/roundcubemail-1.4.4-complete.tar.gz
 
  '''# wget https://github.com/roundcube/roundcubemail/releases/download/1.4.4/roundcubemail-1.4.4-complete.tar.gz
แถว 675: แถว 608:
 
  '''# cp /var/www/html/roundcubemail/config/config.inc.php.sample /var/www/html/roundcubemail/config/config.inc.php
 
  '''# cp /var/www/html/roundcubemail/config/config.inc.php.sample /var/www/html/roundcubemail/config/config.inc.php
 
  '''# chown -R apache:apache /var/www/html/roundcubemail
 
  '''# chown -R apache:apache /var/www/html/roundcubemail
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
=== Create virtualhost ===
=== สร้าง virtualhost ===
 
 
  '''# vi /etc/httpd/conf.d/rcmail.conf
 
  '''# vi /etc/httpd/conf.d/rcmail.conf
</div>
 
  
  <div lang="th" dir="ltr" class="mw-content-ltr">
+
  <VirtualHost *:80>
<VirtualHost *:80>
 
 
     ServerName mail.eai.in.th
 
     ServerName mail.eai.in.th
 
     ServerAdmin webmaster@eai.in.th
 
     ServerAdmin webmaster@eai.in.th
แถว 694: แถว 623:
 
     CustomLog /var/log/httpd/mail.eai.in.th-access.log combined
 
     CustomLog /var/log/httpd/mail.eai.in.th-access.log combined
 
  </VirtualHost>
 
  </VirtualHost>
</div>
 
  
  <div lang="th" dir="ltr" class="mw-content-ltr">
+
  '''# systemctl restart httpd
'''# systemctl restart httpd
 
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Test accessing host
* ทดสอบเข้าเว็บโซต์
 
 
  '''http://mail.eai.in.th/installer/
 
  '''http://mail.eai.in.th/installer/
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Setup to access the database
* ตั้งค่าเชื่อมต่อ database
 
</div>
 
  
  <div lang="th" dir="ltr" class="mw-content-ltr">
+
  host = localhost
host = localhost
 
 
  dbname =roundcubemail
 
  dbname =roundcubemail
 
  user = rcmail
 
  user = rcmail
 
  password = passrc
 
  password = passrc
 
  db_prefix = rc_
 
  db_prefix = rc_
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Setup IMAP
* ตั้งค่า IMAP
 
 
  ssl://mail.eai.in.th  
 
  ssl://mail.eai.in.th  
  993
+
  993  
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Setup SMTP
* ตั้งค่า SMTP
 
 
  ssl://mail.eai.in.th  
 
  ssl://mail.eai.in.th  
 
  465
 
  465
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
 
 
* user, pass ของ eai email
 
* user, pass ของ eai email
 
  thai@eai.in.th และ ไทย@อีเอไอ.ไทย
 
  thai@eai.in.th และ ไทย@อีเอไอ.ไทย
 
  thaiuserpassword
 
  thaiuserpassword
</div>
 
  
<div lang="th" dir="ltr" class="mw-content-ltr">
+
* Using self-sign SSL may cause Roundcube to not able to connect to the mail server. Additional configurations are needed
* การใช้ ssl แบบ self-sign อาจจะทำให้ roundcube ไม่สามารถเชื่อมต่อ mail server ได้ แก้ปัญหาโดยการ config เพิ่มเติม ดังนี้
+
$config
 
  '''# vi /var/www/html/roundcubemail/config/defaults.inc.php
 
  '''# vi /var/www/html/roundcubemail/config/defaults.inc.php
 
  $config['imap_conn_options'] = array(
 
  $config['imap_conn_options'] = array(
แถว 751: แถว 665:
 
   ),
 
   ),
 
  );
 
  );
</div>
 
  
  
 
[[Category: EAI]]
 
[[Category: EAI]]

รุ่นแก้ไขปัจจุบันเมื่อ 17:09, 12 กรกฎาคม 2564

ภาษาอื่น ๆ:
English • ‎ไทย

EAI Email Server

This manual is designed to guide how to install an Email Server to send Thai email addresses or Email Address Internationalization (EAI) using Opensource Software. It could be further developed on different set of softwares.

Required Software

  1. CentOS8 for Virtualbox [CentOS for VirtualBox]
    • user: root
    • pass: rooteai
  2. VirtualBox [Win] [Mac]
  3. VirtualBox Extension Pack [Download]
  4. Filezilla [Win] [Mac]
  5. putty [Win] (for Windows)
  6. Postfix 3.x [Download]
  7. Dovecot 2.x [Download]
  8. MariaDB 10.x [Download]
  9. Roundcube 1.4.x [Download] [tar]
  • ข้อ 1, 2, 3, 4, 5 แนะนำให้ติดตั้งเตรียมไว้ก่อนอบรม

Setting up CentOS8 for Virtualbox

  1. Download and install VirtualBox and VirtualBox Extension Pack
  2. Download CentOS8 for Virtualbox (centos-eai-wokshop.ova)
  3. Double click at centos-eai-wokshop.ova to import into Virtualbox [1]
  4. After importing, double click at centos-eai-wokshop on the left menu in the VirtualBox to open the server
  5. If an error found, due to cannot find network, select "Change network", then click "OK"[2]
  6. login with the provided user, pass, then use command line "ifconfig" to check IP address of the machine [3]
  7. remember this IP address for using ssh to access our server later

(for mac, must allow virtualbox to work as show in this picture [4])

Remarks:

  • This manual have no explanation for installing Centos 8
  • Postfix Version 3.x.x and above will support EAI
In real setting, DNS server is also required

Installing EAI Email Server

1. Setting hostname

1. Update mail server packages to the latest version

# yum -y update

2. Define a hostname, e.g. mail.eai.in.th with command

# hostnamectl set-hostname mail.eai.in.th

3. Add the defined hostname to "hosts" file

# vi /etc/hosts

sample of hosts file

127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4 mail.eai.in.th
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6 mail.eai.in.th

*Depends on the environment of CenOS installation, you may need to install additional services e.g. you may not be able to use "vi" command

4. Install wget to download additional necessary softwares

# yum -y install wget

5. Install telnet to test email server functionality

# yum -y install telnet

2. Setting firewall

1. Verify "firewalld service" status on the mail server

  • It must be active (running)
# systemctl status firewalld

Sample

Active: active (running) since Mon 2019-11-18 14:12:03 +07; 1h 13min ago

2. Check the firewall zone and network interface that are opened

# firewall-cmd --get-active-zones

example

public
interfaces: ens32

3. Check services of firewall in public zone

# firewall-cmd --zone=public --list-services

sample

 cockpit dhcpv6-client ssh 

4. Open firewall services at public zone of mail server (open on services that needed)

# firewall-cmd --permanent --zone=public --add-service={http,https,mysql,smtp,smtps,imap,imaps}
# firewall-cmd --reload

5. Check services list of the firewall at the public zone again, will find the just open services

*ref: configure firewall services for mail server (https://spalinux.com/2015/06/centos-7-basic-configure-firewall-by-firewall-cmd)

# firewall-cmd --zone=public --list-services

example

 cockpit dhcpv6-client http https imap imaps mysql smtp smtps ssh  

6. In this example, we open SELinux for convenience in setting up (it is not recommended for production server)

  • change SELinux=enforcing to SELinux=disabled
# vi /etc/selinux/config

example

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#       enforcing - SELinux security policy is enforced.
#       permissive - SELinux prints warnings instead of enforcing.
#       disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of these two values:
#       targeted - Targeted processes are protected,
#       mls - Multi Level Security protection.
SELINUXTYPE=targeted

7. Check SELinux status again

  • restart server and check the status
# reboot
# sestatus

example

 disabled 

3. Create an SSL Cert

  • The step is for creating SSL key for using with postfix and dovecot

1. Create a private key

# cd /etc/pki/tls/certs
# /usr/bin/openssl genrsa -aes128 2048 > eai.key

example

Generating RSA private key, 2048 bit long modulus
...
...
e is 65537 (0x10001)
Enter pass phrase: #set passphrase
Verifying - Enter pass phrase:  #confirm

2. Remove Passphase from the created private key

# /usr/bin/openssl rsa -in eai.key -out eai.key

example

Enter pass phrase for eai.key:  #input passphrase
writing RSA key

3. Create csr

# /usr/bin/openssl req -utf8 -new -key eai.key -out eai.csr

example

You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:TH		#country
State or Province Name (full name) []:Bangkok		   #state
Locality Name (eg, city) [Default City]:Dusit		#city
Organization Name (eg, company) [Default Company Ltd]:EAI  	#company
Organizational Unit Name (eg, section) []:IT  	 #department
Common Name (eg, your name or your server's hostname) []:mail.eai.in.th  	 #server's FQDN
Email Address []:xxx@eai.in.th		#email address
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:		#Enter
An optional company name []:		#Enter

4. Generate key

# /usr/bin/openssl x509 -in eai.csr -out eai.crt -req -signkey eai.key -days 365

example

Signature ok
subject=/C=JP/ST=Hiroshima/L=Hiroshima/O=GTS/OU=Server World/CN=www.srv.world/emailAddress=xxx@eai.in.th
Getting Private key


4. Install mariadb, Postfix and Dovecot

1. Install mariadb , Postfix , Dovecot and necessary packages

# yum -y install postfix dovecot mariadb-server dovecot-mysql postfix-mysql

2. Start service of Postfix, Dovecot, MariaDB every time that the server is started

# systemctl start postfix && systemctl start dovecot && systemctl start mariadb
# systemctl enable postfix && systemctl enable dovecot && systemctl enable mariadb

3. Check status of the Postfix, Dovecot, MariaDB

# systemctl status postfix
# systemctl status dovecot
# systemctl status mariadb

5. Setup MariaDB

1. Set UTF8 for mysql to accept Unicode by adding the following command to /etc/my.cnf.d/maridb-server.cnf under [mysqld]

# vi /etc/my.cnf.d/mariadb-server.cnf
#
# These groups are read by MariaDB server.
# Use it for options that only the server (but not clients) should see
#
# See the examples of server my.cnf files in /usr/share/mysql/
#
# this is read by the standalone daemon and embedded servers
[server]
# this is only for the mysqld standalone daemon
# Settings user and group are ignored when systemd is used.
# If you need to run mysqld under a different user or group,
# customize your systemd unit file for mysqld/mariadb according to the
# instructions in http://fedoraproject.org/wiki/Systemd
[mysqld]
character-set-server = utf8
collation-server = utf8_general_ci
skip-character-set-client-handshake
bind-address=127.0.0.1
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
log-error=/var/log/mariadb/mariadb.log
pid-file=/run/mariadb/mariadb.pid
#
# * Galera-related settings
#
[galera]
# Mandatory settings
#wsrep_on=ON
#wsrep_provider=
#wsrep_cluster_address=
#binlog_format=row
#default_storage_engine=InnoDB
#innodb_autoinc_lock_mode=2
#
# Allow server to accept connections on all interfaces.
#
#bind-address=0.0.0.0
#
# Optional setting
#wsrep_slave_threads=1
#innodb_flush_log_at_trx_commit=0 
# this is only for embedded server
[embedded]
# This group is only read by MariaDB servers, not by MySQL.
# If you use the same .cnf file for MySQL and MariaDB,
# you can put MariaDB-only options here
[mariadb]
# This group is only read by MariaDB-10.3 servers.
# If you use the same .cnf file for MariaDB of different versions,
# use this group for options that older servers don't understand
[mariadb-10.3]

2. Restart MariaDB

# systemctl restart mariadb

3. Set security access to mysql by setup password for root user (* define only new password, skip the rest by pressing enter)

#  mysql_secure_installation

4. Login to mysql using the new password

# mysql -u root -p

5. Create new DB for keeping records of Email Server usage

# CREATE DATABASE eaimail;
# USE eaimail;

6. Create a user with grants to the eaimail database

# GRANT SELECT, INSERT, UPDATE, DELETE ON eaimail.* TO 'yourdbuser'@'localhost' IDENTIFIED BY 'yourdbpassword';
# GRANT SELECT, INSERT, UPDATE, DELETE ON eaimail.* TO 'yourdbuser'@'localhost.localdomain' IDENTIFIED BY 'yourdbpassword';
# FLUSH PRIVILEGES;

7. Check the created user

# SHOW GRANTS FOR 'yourdbuser'@'localhost';

8. Create tables for domains, forwardings (to forward EAI email to ASCII email address), and users for creating mailboxes

# CREATE TABLE domains (domain varchar(50) NOT NULL, PRIMARY KEY (domain) );
# CREATE TABLE forwardings (source varchar(80) NOT NULL, destination TEXT NOT NULL, PRIMARY KEY (source) );
# CREATE TABLE users (email varchar(80) NOT NULL, password varchar(20) NOT NULL, PRIMARY KEY (email) );

9. Select DB of a mail server and define EAI and English domains and email address with passwords to start using the email server

# INSERT INTO domains (domain) VALUES ('eai.in.th');
# INSERT INTO domains (domain) VALUES ('อีเอไอ.ไทย');
# INSERT INTO users (email, password) VALUES ('thai@eai.in.th', ENCRYPT('thaiuserpassword'));
# INSERT INTO users (email, password) VALUES ('ไทย@อีเอไอ.ไทย', ENCRYPT('thaiuserpassword'));

10. Setup a forwrding rule to forward all emails to EAI email address to ASCII email address, since the server can creat mailboxes in Unicode

# INSERT INTO forwardings (source,destination) VALUES ('ไทย@อีเอไอ.ไทย','thai@eai.in.th');
# quit

6. Setup Postfix

Create connect file between Postfix and MariaDB

  • Create a script file to get domain value from DB
# vi /etc/postfix/mysql-virtual_domains.cf
user = yourdbuser
password = yourdbpassword
dbname = eaimail
query = SELECT domain AS virtual FROM domains WHERE domain='%s'
hosts = 127.0.0.1
  • Create a script file to forward emails
# vi /etc/postfix/mysql-virtual_forwardings.cf
user = yourdbuser
password = yourdbpassword
dbname = eaimail
query = SELECT destination FROM forwardings WHERE source='%s'
hosts = 127.0.0.1
  • Create a script file for creating mailbox and use for login
# vi /etc/postfix/mysql-virtual_mailboxes.cf
user = yourdbuser 
password = yourdbpassword
dbname = eaimail
query = SELECT CONCAT(SUBSTRING_INDEX(email,'@',-1),'/',SUBSTRING_INDEX(email,'@',1),'/') FROM users WHERE email='%s'
hosts = 127.0.0.1
  • Create a script file for forwarding all email to another SMTP server (in the case that referring to a host as an IP address)
# vi /etc/postfix/mysql-virtual_email2email.cf
user = yourdbuser 
password = yourdbpassword
dbname = eaimail
query = SELECT email FROM users WHERE email='%s'
hosts = 127.0.0.1
  • Set access control right to the created script
# chmod 640 /etc/postfix/mysql-virtual_*.cf && chgrp postfix /etc/postfix/mysql-virtual_*.cf

Create user vmail for reading/writing the mailbox

  • Create group for using with the mailbox
# groupadd -g 5000 vmail
# useradd -g vmail -u 5000 vmail -d /home/vmail -m

Modify "/etc/postfix/main.cf"

# postconf "myhostname=mail.eai.in.th"
# postconf "mydomain=eai.in.th"
# postconf "myorigin=\$mydomain"
# postconf "inet_interfaces=all"
# postconf "inet_protocols=ipv4"
# postconf "mydestination=localhost, localhost.localdomain"
# postconf "mynetworks=127.0.0.1"
# postconf "readme_directory=no"
# postconf "smtpd_tls_cert_file=/etc/pki/tls/certs/eai.crt"
# postconf "smtpd_tls_key_file=/etc/pki/tls/certs/eai.key"
# postconf "shlib_directory=no"
# postconf "smtpd_sasl_auth_enable=yes"
# postconf "smtpd_sasl_type=dovecot"
# postconf "smtpd_sasl_path=private/auth"
# postconf "smtpd_sasl_authenticated_header=yes"
# postconf "broken_sasl_auth_clients=yes"
# postconf "smtpd_use_tls=yes"
# postconf "smtpd_recipient_restrictions=permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination"
# postconf "smtpd_tls_auth_only=yes"
# postconf "smtpd_tls_loglevel=1"
# postconf "virtual_mailbox_base=/home/vmail"
# postconf "virtual_mailbox_maps=proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf"
# postconf "virtual_mailbox_domains=proxy:mysql:/etc/postfix/mysql-virtual_domains.cf"
# postconf "virtual_alias_maps=proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf"
# postconf "virtual_uid_maps=static:5000"
# postconf "virtual_gid_maps=static:5000"
# postconf "virtual_alias_domains=อีเอไอ.ไทย"
# postconf "virtual_transport=dovecot"
# postconf "proxy_read_maps=\$local_recipient_maps \$mydestination \$virtual_alias_maps \$virtual_alias_domains \$virtual_mailbox_maps \$virtual_mailbox_domains \$relay_recipient_maps \$relay_domains \$canonical_maps \$sender_canonical_maps \$recipient_canonical_maps \$relocated_maps \$transport_maps \$mynetworks"
# postconf "smtputf8_enable=yes"
  • Example file
smtp_tls_security_level = may
meta_directory = /etc/postfix
shlib_directory = no
myhostname = mail.eai.in.th 
mydomain = eai.in.th 
myorigin = $mydomain 
mynetworks = 127.0.0.1
smtpd_sasl_auth_enable = yes
smtpd_sasl_type = dovecot
smtpd_sasl_path = private/auth
smtpd_sasl_authenticated_header = yes
broken_sasl_auth_clients = yes
smtpd_use_tls = yes
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_tls_auth_only = yes
smtpd_tls_loglevel = 1
virtual_mailbox_base = /home/vmail
virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf
virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
virtual_alias_domains = อีเอไอ.ไทย
virtual_transport = dovecot
virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf
smtputf8_enable = yes
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps 
$sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks

Modify "/etc/postfix/master.cf"

# postconf -M smtps/inet="smtps inet n - - - - smtpd"
# postconf -P "smtps/inet/syslog_name=postfix/smtps"
# postconf -P "smtps/inet/smtpd_tls_wrappermode=yes"
# postconf -P "smtps/inet/smtpd_sasl_auth_enable=yes"
# postconf -P "smtps/inet/smtpd_client_restrictions=permit_sasl_authenticated,reject"
# postconf -P "smtps/inet/smtpd_relay_restrictions=permit_sasl_authenticated,reject"
# postconf -P "smtps/inet/milter_macro_daemon_name=ORIGINATING"
# postconf -vM dovecot/unix="dovecot   unix  -       n       n       -       -       pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${recipient}"
  • Sample file
smtps inet n - - - - smtpd
   -o syslog_name=postfix/smtps
   -o smtpd_tls_wrappermode=yes 
   -o smtpd_sasl_auth_enable=yes 
   -o smtpd_client_restrictions=permit_sasl_authenticated,reject 
   -o smtpd_relay_restrictions=permit_sasl_authenticated,reject 
   -o milter_macro_daemon_name=ORIGINATING
dovecot   unix  -       n       n       -       -       pipe
    flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${recipient}
  • restart postfix
# systemctl restart postfix

7. Setup Dovecot

Create a connect file between Dovecot and Mariadb

  • Create a script to let Dovecot to be able to use with SQL
# vi /etc/dovecot/dovecot-sql.conf.ext
driver = mysql
connect = host=127.0.0.1 dbname=eaimail user=yourdbuser password=yourdbpassword
default_pass_scheme = CRYPT
password_query = SELECT email as user, password FROM users WHERE email='%u';
  • Allow users in the Dovecot group to use
# chmod 640 /etc/dovecot/dovecot-sql.conf.ext && chgrp dovecot /etc/dovecot/dovecot-sql.conf.ext

Modify "/etc/dovecot/dovecot.conf"

  • Backup the exisitng configuration
# mv /etc/dovecot/dovecot.conf /etc/dovecot/dovecot.conf-backup
  • Config dovecot
# vi /etc/dovecot/dovecot.conf

example

protocols = imap pop3 lmtp
log_timestamp = "%Y-%m-%d %H:%M:%S "
mail_location = maildir:/home/vmail/%d/%n/Maildir

ssl_cert = </etc/pki/tls/certs/eai.crt
ssl_key = </etc/pki/tls/certs/eai.key
ssl_dh_parameters_length = 2048 
ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL
namespace {
    type = private
    separator = .
    prefix = INBOX.
    inbox = yes
}
service auth {
    unix_listener auth-master {
        mode = 0600
        user = vmail
    }
    unix_listener /var/spool/postfix/private/auth {
        mode = 0666
        user = postfix
        group = postfix
    }
user = root
}
auth_mechanisms = plain login
service auth-worker {
    user = root
}
protocol lda {
    log_path = /home/vmail/dovecot-deliver.log
    auth_socket_path = /var/run/dovecot/auth-master
    postmaster_address = postmaster@eai.in.th
}
protocol pop3 {
    pop3_uidl_format = %08Xu%08Xv
        pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
}
passdb {
    driver = sql
    args = /etc/dovecot/dovecot-sql.conf.ext
}
userdb {
    driver = static
    args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes
}
  • Restart Dovecot
# systemctl restart dovecot

8. Test the EAI Email Server

1. Test imap

# telnet localhost imap

2. Should get the result, the use quit to quit from telnet

Trying 127.0.0.1...
Connected to localhost.localdomain.
Escape character is '^]'.
+OK Dovecot ready.

3. Modify /etc/aliases by adding the lines

# vi /etc/aliases
mailer-daemon:	postmaster
postmaster:	root
root: postmaster@eai.in.th

4 Update aliases and restart postfix

# newaliases
# systemctl restart postfix

5. Test SMTP server

# telnet localhost 25
# ehlo localhost

6. Should get the following results

250-mail.eai.in.th
250-PIPELINING
250-SIZE 30720000
250-VRFY
250-ETRN
250-STARTTLS
250-ENHANCEDSTATUSCODES
250-8BITMIME
250-DSN
250 SMTPUTF8

7. Install mailx and test sending emails

# yum install mailx
# mailx thai@eai.in.th (ใส่ subject แล้ว enter ตามด้วยเนื้อหา และใช้ Ctrl+D เพื่อส่งออก)

8. Check the log of email sending : /var/log/maillog as following:

Nov 13 15:19:07 mail postfix/pickup[31954]: E9AB020199E5: uid=0 from=<root>
Nov 13 15:19:07 mail postfix/cleanup[1938]: E9AB020199E5: message-id=<20171113081907.E9AB020199E5@mail.eai.in.th>
Nov 13 15:19:07 mail postfix/qmgr[21141]: E9AB020199E5: from=<root@eai.in.th>, size=434, nrcpt=1 (queue active)
Nov 13 15:19:08 mail postfix/pipe[1946]: E9AB020199E5: to=<tanagan@eai.in.th>, relay=dovecot, delay=0.09, delays=0.04/0.01/0/0.03, dsn=2.0.0, status=sent (delivered via dovecot service)
Nov 13 15:19:08 mail postfix/qmgr[21141]: E9AB020199E5: removed

9. Check log of dovecot sedning : /home/vmail/dovecot-deliver.log should get the following results

2017-11-13 15:19:08 lda(tanagan@eai.in.th): Info: msgid=<20171113081907.E9AB020199E5@mail.eai.in.th>: saved mail to INBOX

10. Check the mailbox. When there are sendings and receivings emails, you will see the results

# cd /home/vmail/eai.in.th/thai/Maildir
# find
.
./dovecot-uidlist
./cur
./new
./new/1285609582.P6115Q0M368794.li172-137
./dovecot.index
./dovecot.index.log
./tmp

11. Check mailbox by using mail client, mutt, to see emaila inside the mailbox

# yum install mutt
# mutt -f .

12. Test sending an EAI mails

# telnet localhost 25
# EHLO localhost
# MAIL FROM: ธนากานต์@อีเอไอ.ไทย SMTPUTF8		
# RCPT TO: ธนากานต์@คน.ไทย
# data
# Subject: eai test
# เทสอีเมลส์ภาษาไทย
# .
  • Use “.” to end and sending the message
  • Press Ctrl+] to quit

9. Installing Roundcube Webmail

Installing Apache PHP

  • Install repo of php 7.4 and all to install php 7.4
# yum -y install https://rpms.remirepo.net/enterprise/remi-release-8.rpm 
# yum module reset php && yum module enable php:remi-7.4 -y
  • Install php, php library and apache web server
# yum -y install httpd php php-common php-devel php-imap php-imagick php-json php-xml php-mbstring php-pear php-pdo php-intl php-ldap php-gd php-zip php-pdo_mysql php-curl php-bz2 php-gmp
  • Start service apache and php and set to start automatiacally
# systemctl start httpd && systemctl start php-fpm
# ​systemctl enable httpd && systemctl enable php-fpm
  • Check apache status
# systemctl status httpd 
# systemctl status php-fpm

Setup php

  • Setup timezone
# vi /etc/php.ini 
[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone 
date.timezone = Asia/Bangkok

Setup MariaBD database

  • Create database roundcubemail with username=rcmail, password=passrc
# mysql -u root -p
# CREATE DATABASE roundcubemail CHARACTER SET utf8 COLLATE utf8_general_ci;
# GRANT ALL PRIVILEGES ON roundcubemail.* TO rcmail@localhost IDENTIFIED BY 'passrc';
# FLUSH PRIVILEGES;

Setup RoundCube

# cd /var/www/html/
# wget https://github.com/roundcube/roundcubemail/releases/download/1.4.4/roundcubemail-1.4.4-complete.tar.gz
# tar zvfx /var/www/html/roundcubemail-1.4.4-complete.tar.gz 
# mv /var/www/html/roundcubemail-1.4.4 /var/www/html/roundcubemail
# cp /var/www/html/roundcubemail/config/config.inc.php.sample /var/www/html/roundcubemail/config/config.inc.php
# chown -R apache:apache /var/www/html/roundcubemail

Create virtualhost

# vi /etc/httpd/conf.d/rcmail.conf
<VirtualHost *:80>
    ServerName mail.eai.in.th
    ServerAdmin webmaster@eai.in.th
    DocumentRoot /var/www/html/roundcubemail
    <Directory /var/www/html/roundcubemail>
        Options -Indexes +FollowSymLinks
        AllowOverride All
    </Directory>
    ErrorLog /var/log/httpd/mail.eai.in.th-error.log
    CustomLog /var/log/httpd/mail.eai.in.th-access.log combined
</VirtualHost>
# systemctl restart httpd
  • Test accessing host
http://mail.eai.in.th/installer/
  • Setup to access the database
host = localhost
dbname =roundcubemail
user = rcmail
password = passrc
db_prefix = rc_
  • Setup IMAP
ssl://mail.eai.in.th 
993 
  • Setup SMTP
ssl://mail.eai.in.th 
465
  • user, pass ของ eai email
thai@eai.in.th และ ไทย@อีเอไอ.ไทย
thaiuserpassword
  • Using self-sign SSL may cause Roundcube to not able to connect to the mail server. Additional configurations are needed

$config

# vi /var/www/html/roundcubemail/config/defaults.inc.php
$config['imap_conn_options'] = array(
  'ssl'         => array(
     'verify_peer'      => false,
     'verify_peer_name' => false,
  ),
);
 
$config['smtp_conn_options'] = array(
  'ssl'         => array(
     'verify_peer'      => false,
     'verify_peer_name' => false,
  ),
);